Get ready to pass the NSE5_FMG-7.0 Exam right now using our NSE 5 Network Security Analyst Exam Package
A fully updated 2024 NSE5_FMG-7.0 Exam Dumps exam guide from training expert GuideTorrent
Fortinet NSE5_FMG-7.0 is an exam that certifies the knowledge and expertise of individuals in Fortinet's FortiManager 7.0 product. FortiManager 7.0 is a centralized management solution for Fortinet's security fabric, allowing administrators to manage and monitor multiple devices from a single console. NSE5_FMG-7.0 exam is designed to test the knowledge and skills of individuals in configuring and managing FortiManager 7.0.
NEW QUESTION # 31
Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)
- A. Managed devices in other ADOMs must be treated as external gateways
- B. Protected subnets are the subnets behind the device that you don't want to allow access to over the IPsec
VPN - C. Managed gateways are devices managed by FortiManager in the same ADOM
- D. External gateways are third-party VPN gateway devices only
Answer: A,C
NEW QUESTION # 32
Which configuration setting for FortiGate is part of an ADOM-level database on FortiManager?
- A. NSX-T Service Template
- B. SNMP
- C. Security profiles
- D. Routing
Answer: C
NEW QUESTION # 33
Refer to the exhibit.
Which two statements about an ADOM set in Normal mode on FortiManager are true? (Choose two.)
- A. It allows making configuration changes for managed devices on FortiManager panes
- B. FortiManager automatically installs the configuration difference in revisions on the managed FortiGate
- C. You cannot assign the same ADOM to multiple administrators
- D. It supports the FortiManager script feature
Answer: A,D
Explanation:
"FortiGate units in the ADOM will query their own configuration every 5 seconds. If there has been a configuration change, the FortiGate unit will send a diff revision on the change to the FortiManager using the FGFM protocol."
NEW QUESTION # 34
Refer to the exhibit.
You ate using the Quick install option to install configuration changes on the managed FortiGate Which two statements correctly describe the result? (Choose two)
- A. It installs device-level changes on the FortiGate device without launching the Install Wizard
- B. It installs all the changes in the device database first and the administrator must reinstall the changes on the FodiGate device
- C. It install provisioning template changes on the FortiGate device
- D. It provides the option to preview only the policy package changes before installing them
Answer: A,C
NEW QUESTION # 35
Refer to the exhibit.
Which two statements are true if the script is executed using the Device Database option? (Choose two.)
- A. You must install these changes using the Install Wizard to a managed device
- B. The script history will show successful installation of the script on the remote FortiGate
- C. The successful execution of a script on the Device Database will create a new revision history
- D. The Device Settings Status will be tagged as Modified
Answer: A,D
NEW QUESTION # 36
An administrator configures a new firewall policy on FortiManager and has not yet pushed the changes to the
managed FortiGate.
In which database will the configuration be saved?
- A. Configuration-level database
- B. Revision history database
- C. Device-level database
- D. ADOM-level database
Answer: D
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD47942
NEW QUESTION # 37
An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.
Which troubleshooting step should you take to resolve the issue?
- A. Make sure the administrator IP address is part of the trusted hosts.
- B. Make sure Offline Mode is disabled
- C. Make sure ADOMs are enabled and the administrator has access to the Global ADOM
- D. Make sure FortiManager Access is enabled in the administrator profile
Answer: A
Explanation:
Even if a user entered the correct userid/password, the FMG denies access if a user is logging in from an untrusted source IP subnets.
NEW QUESTION # 38
An administrator would like to create an SD-WAN default static route for a newly created SD-WAN using the FortiManager GUI. Both port1 and port2 are part of the SD-WAN member interfaces.
Which interface must the administrator select in the static route device drop-down list?
- A. port1
- B. virtual-wan-link
- C. port2
- D. auto-discovery
Answer: B
NEW QUESTION # 39
An administrator configures a new firewall policy on FortiManager and has not yet pushed the changes to the managed FortiGate.
In which database will the configuration be saved?
- A. Configuration-level database
- B. Revision history database
- C. Device-level database
- D. ADOM-level database
Answer: D
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD47942
NEW QUESTION # 40
Which of the following statements are true regarding schedule backup of FortiManager? (Choose two.)
- A. Can be configured from the CLI and GUI
- B. Backs up all devices and the FortiGuard database.
- C. Supports FTP, SCP, and SFTP
- D. Does not back up firmware images saved on FortiManager
Answer: C,D
NEW QUESTION # 41
In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices. The administrator sent a device registration to FortiManager from a remote FortiGate. Which one of the following statements is true?
- A. By default, the unregistered FortiGate will appear in the root ADOM.
- B. The FortiGate will be added automatically to the default ADOM named FortiGate.
- C. The FortiGate will be automatically added to the Training ADOM.
- D. The FortiManager administrator must add the unregistered device manually to the unregistered device
Answer: A
Explanation:
manually to the Training ADOM using the Add Device wizard
NEW QUESTION # 42
Refer to the exhibit.
According to the error message why is FortiManager failing to add the FortiAnalyzer device?
- A. The administrator must select the Forti-Manager administrative access checkbox on the FortiAnalyzer management interface
- B. The administrator must use the correct user name and password of the FortiAnalyzer device
- C. The administrator must turn off the Use Legacy Device login and add the FortiAnalyzer device to the same network as Forti-Manager
- D. The administrator must use the Add Model Device section and discover the FortiAnalyzer device
Answer: D
NEW QUESTION # 43
Refer to the exhibit.
Which two statements about the output are true? (Choose two.)
- A. The latest history for the managed FortiGate does not match with the device-level database
- B. Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed
- C. The latest revision history for the managed FortiGate does match with the FortiGate running configuration
- D. Configuration changes directly made on the FortiGate have been automatically updated to device-level
Answer: A,C
Explanation:
database
Explanation:
STATUS: dev-db: modified; conf: in sync; cond: pending; dm: retrieved; conn: up - dev-db: modified - This is the device setting status which indicates that configuration changes were made on FortiManager. - conf: in sync - This is the sync status which shows that the latest revision history is in sync with Fortigate's configuration. - cond: pending - This is the configuration status which says that configuration changes need to be installed.
Most probably a retrieve was done in the past (dm: retrieved) updating the revision history DB (conf: in sync) and FortiManager device level DB, now there is a new modification on FortiManager device level DB (dev-db: modified) which wasn't installed to FortiGate (cond: pending), hence; revision history DB is not aware of that modification and doesn't match device DB.
Conclusion: - Revision DB does match FortiGate. - No changes were installed to FortiGate yet. - Device DB doesn't match Revision DB. - No changes were done on FortiGate (auto-update) but configuration was retrieved instead After an Auto-Update or Retrieve: device database = latest revision = FGT Then after a manual change on FMG end (but no install yet): latest revision = FGT (still) but now device database has been modified (is different).
After reverting to a previous revision in revision history: device database = reverted revision != FGT
NEW QUESTION # 44
View the following exhibit, which shows the Download Import Report:
Why it is failing to import firewall policy ID 2?
- A. Policy ID 2 for this managed FortiGate already exists on FortiManager in policy package named Remote-FortiGate.
- B. The address object used in policy ID 2 already exist in ADON database with any as interface association and conflicts with address object interface association locally on the FortiGate
- C. Policy ID 2 does not have ADOM Interface mapping configured on FortiManager
- D. Policy ID 2 is configured from interface any to port6 FortiManager rejects to import this policy because any interface does not exist on FortiManager
Answer: B
Explanation:
FortiManager_6.4_Study_Guide-Online - page 331 & 332
NEW QUESTION # 45
View the following exhibit:
Which two statements are true if the script is executed using the Remote FortiGate Directly (via CLI) option? (Choose two.)
- A. FortiManager will create a new revision history.
- B. FortiManager provides a preview of CLI commands before executing this script on a managed FortiGate.
- C. You must install these changes using Install Wizard
- D. FortiGate will auto-update the FortiManager's device-level database.
Answer: A,D
NEW QUESTION # 46
Refer to the exhibit.
An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.
When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?
- A. Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings.
- B. It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.
- C. 192.168.0.1/24
- D. 10.200.1.0/24
Answer: D
Explanation:
FortiManager_6.4_Study_Guide-Online - page 209
In the example, the dynamic address object LocalLan refers to the internal network address of the managed firewalls. The object has a default value of 192.168.1.0/24. The mapping rules are defined per device. For Remote-FortiGate, the address object LocalLan referes to 10.10.11.0/24. The devices in the ADOM that do not have dynamic mapping for LocalLan have a default value of 192.168.1.0/2.
NEW QUESTION # 47
Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)
- A. Managed devices in other ADOMs must be treated as external gateways
- B. Managed gateways are devices managed by FortiManager in the same ADOM
- C. External gateways are third-party VPN gateway devices only
- D. Protected subnets are the subnets behind the device that you don't want to allow access to over the IPsec VPN
Answer: A,B
NEW QUESTION # 48
Refer to the exhibit.
A junior administrator is troubleshooting a FortiManager connectivity issue that rs occurring with managed FortiGate devices Given the FortiManager device manager settings shown in the exhibit what can you conclude from the exhibit?
- A. The administrator can reclaim the FGFM tunnel to get both devices online
- B. The administrator had restored the FortiManager configuration file
- C. The administrator must refresh both devices to restore connectivity
- D. FortiManager test internet connectivity therefore, both devices appear to be down
Answer: D
NEW QUESTION # 49
Refer to the exhibit.
An administrator logs into the FortiManager GUI and sees the panes shown in the exhibit.
Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two.)
- A. The administrator logged in using the unsecure protocol HTTP, so the view is restricted.
- B. The administrator profile does not have full access privileges like the Super_User profile.
- C. FortiAnalyzer features are not enabled on FortiManager.
- D. The administrator IP address is not a part of the trusted hosts configured on FortiManager interfaces.
Answer: B,C
NEW QUESTION # 50
Refer to the exhibit.
Which two statements are true if the script is executed using the Device Database option? (Choose two.)
- A. You must install these changes using the Install Wizard to a managed device
- B. The script history will show successful installation of the script on the remote FortiGate
- C. The successful execution of a script on the Device Database will create a new revision history
- D. The Device Settings Status will be tagged as Modified
Answer: A,D
NEW QUESTION # 51
View the following exhibit:
An administrator used the value shown in the exhibit when importing a Local-FortiGate into FortiManager. What name will be used to display the firewall policy for port1?
- A. port1 on both FortiGate and FortiManager
- B. WAN zone on FortiGate and WAN zone on FortiManager
- C. WAN zone on FortiGate and WAN interface on FortiManager
- D. port1 on FortiGate and WAN on FortiManager
Answer: D
NEW QUESTION # 52
Refer to the exhibit.
An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.
When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?
- A. 10.200.1.0/24
- B. Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings.
- C. It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.
- D. 192.168.0.1/24
Answer: D
NEW QUESTION # 53
In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices. The administrator authorized the FortiGate device on FortiManager using the Fortinet Security Fabric.
Given the administrator's actions, which statement correctly describes the expected result?
- A. The authorized FortiGate will appear in the root ADOM.
- B. The authorized FortiGate can be added to the Training ADOM using FortiGate Fabric Connectors.
- C. The authorized FortiGate will be automatically added to the Training ADOM.
- D. The FortiManager administrator must add the authorized device to the Training ADOM using the Add Device wizard only.
Answer: A
NEW QUESTION # 54
An administrator is in the process of moving the system template profile between ADOMs by running the following command:
execute improfile import-profile ADOM2 3547 /tmp/myfile
Where does the administrator import the file from?
- A. ADOM1
- B. ADOM2
- C. File system
- D. ADOM2 object database
Answer: B
NEW QUESTION # 55
......
Master 2024 Latest The Questions NSE 5 Network Security Analyst and Pass NSE5_FMG-7.0 Real Exam!: https://torrentpdf.guidetorrent.com/NSE5_FMG-7.0-dumps-questions.html