Get 2024 Most Reliable Nutanix NCP-MCI-6.5 Training Materials [Q43-Q64]

Get 2024 Most Reliable Nutanix NCP-MCI-6.5 Training Materials

The Realest Study Materials NCP-MCI-6.5 Dumps

NEW QUESTION # 43
Which two capabilities does IPAM provide in a Nutanix networking configuration? (Choose two.)

• A. Allows proxy server settings to be set up for a defined network
• B. Allows AHV to assign IP addresses automatically to VMs using DHCP
• C. Configures firewall rules to prevent or allow certain TCP/IP traffic
• D. Configures a VLAN with an IP subnet and assigns a group of IP addresses

Answer: B,D

NEW QUESTION # 44
What is the minimum time a newly created Deduplication storage policy takes to apply to the VMs in the container?

• A. 30 minutes
• B. 60 minutes
• C. 5 Minutes
• D. 10 minutes

Answer: B

Explanation:
Deduplication is a feature that reduces space usage by consolidating duplicate data blocks on Nutanix storage. Deduplication can be enabled on a storage container for either cache or capacity, or both. Cache deduplication is performed on the data in memory and SSD, while capacity deduplication is performed on the data in HDD. Capacity deduplication is not enabled by default and is available if you have purchased a Pro or higher license2. When you enable capacity deduplication on a storage container, it takes effect after 60 minutes3. This delay allows the system to identify the best candidates for deduplication and avoid unnecessary overhead.

NEW QUESTION # 45
An administrator manages an AHV cluster that is dedicated to a dev/test environment. The administrator receiving complaints from users that they are unable to create new VMs on the cluster.
After the reviewing the cluster, the administrator finds that the memory resources are almost fully utilized, with many VMs over-provisioned on memory.
What option is the most efficient resolution to enable additional VMs to be created?

• A. Upgrade the nodes with additional memory DlMMs.
• B. Enable Memory HA on the over-provisioned VMs.
• C. Disable HA Reservation on the cluster.
• D. Enable Memory Overcommit on the over-provisioned VMs.

Answer: C

NEW QUESTION # 46
An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event Which storage optimizations should the administrator set to meet the requirements?

• A. Compressoion and Deduplication
• B. Compression only
• C. Deduplication and Erasure Coding
• D. Compression Deduplication and Erasure Coding

Answer: D

Explanation:
According to the web search results, three storage optimizations that should be set on a dedicated storage container for a VDI solution with persistent desktops are compression, deduplication and erasure coding. Compression is a technique that reduces the size of data by removing redundant information. Deduplication is a technique that eliminates duplicate copies of data blocks and stores only unique blocks. Erasure coding is a technique that increases usable capacity by reducing the replication factor of data blocks and using parity information instead7. These three optimizations can improve performance and save storage space for VDI workloads, especially during a node failure event when data needs to be rebuilt from parity information8. The administrator can enable these optimizations by using Prism Element web console or ncli command-line interface9.

NEW QUESTION # 47
Refer to Exhibit:

An administrator is trying to put a node into maintenance mode but receives the message shown in the exhibit.
What is a potential reason for this dialog?

• A. LinuxVM1 uses e vDisks stored in a RF3 Datastore
• B. LinuxVM1 uses a virtual GPU.
• C. LinuxVM1 uses a vDisks stored in a RFI Datastore
• D. LinuxVM1 uses a Volume Group

Answer: C

Explanation:
According to the Nutanix Community1, host maintenance mode is used to safely migrate all the user virtual machines (VMs) in the host and make sure no VMs are running on the node. If a VM can't be migrated to another host, you need to shut down the VM for the host to enter into maintenance mode.
According to The Virtualist2, a storage container is a logical segmentation of a storage pool that can be mounted as an NFS datastore on ESXi hosts. You can choose a replication factor (RF) for each storage container, which determines how many copies of data are stored across different nodes.

NEW QUESTION # 48
An administrator has a Custom backup application that requires a 2TB disk and runs m Windows. Throughput is considerably lower than expected.
The application was installed on a VM with the following configuration:
* FOU vCPUs with one core/vCPU
* 4GB of Memory
* One 50GB vDisk for the Windows installation
* One 2TB vDisk for the application
What is the recommended configuration change to improve throughput?

• A. Increase the number of cores per vCPU
• B. Add 4GB of memory to the VM
• C. Span the 2TB disk across four vDisks
• D. Increase the vCPUs assigned to the VM

Answer: A

NEW QUESTION # 49
An administrator would like to leverage the Reliable Event Logging Protocol (RELP) with their Remote Syslog Server. After completing the configuration, it is observed that RELP logging is not working as expected.
What is the likely cause of this issue?

• A. The remote server does not have rsyslog-relp installed.
• B. The GENESIS was the only one chosen to forward log information.
• C. The Remote Syslog Server was configure using TCP as the protocol.
• D. The cluster does not have RELP installed.

Answer: A

Explanation:
According to the Red Hat Customer Portal, to use RELP with Rsyslog, you need to install the rsyslog-relp package on both the server and the client. If the remote server does not have rsyslog-relp installed, RELP logging will not work as expected.

NEW QUESTION # 50
An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.

Which metrics should the administrator review in Prism Analysis Graphs?

• A. Cluster IO, Network, Database and App Server CPU
• B. Cluster IO, CPU, Memory, Network, App Server CPU
• C. Cluster CPU and Memory Only
• D. Cluster IO, CPU, Memory and Database and App Server CPU

Answer: B

NEW QUESTION # 51
Which two access protocols are supported by Files? (Choose two.)

• A. SMB
• B. FCOE
• C. ISCSI
• D. NFS

Answer: A,D

Explanation:
According to the Network File System web search result3, NFS (Network File System) is a distributed file system protocol that allows a user on a client computer to access files over a network in a manner similar to how local storage is accessed. NFS is one of the access protocols supported by Files. According to the [MS-WPO]: File Access Services Protocols web search result4, SMB (Server Message Block) is a Windows file sharing protocol that enables applications to discover, access, and share files that are hosted on or made available by a file server, using a network between them, in a secure and managed environment. SMB is another access protocol supported by Files. Therefore, SMB and NFS are two access protocols supported by Files.

NEW QUESTION # 52
An administrator responsible for a VDl environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDl VMs.
What are two impacts on the cluster? (Choose two)

• A. Increase CPU ready%
• B. Increase CPU utilization%
• C. Increasing CPU counts will decrease memory utilization
• D. Increase memory utilization%

Answer: A,B

Explanation:
According to the web search results, the two impacts on the cluster that will result from increasing the vCPU count on all of the VDI VMs are:
Increase CPU utilization%: CPU utilization is the percentage of time that a CPU is busy executing instructions5. By increasing the vCPU count on all of the VDI VMs, the administrator will increase the demand for CPU resources on the cluster, which will increase the CPU utilization percentage6.
Increase CPU ready%: CPU ready is the percentage of time that a vCPU is ready to run but is waiting for a physical CPU to become available5. By increasing the vCPU count on all of the VDI VMs, the administrator will increase the contention for physical CPU resources on the cluster, which will increase the CPU ready percentage6. A high CPU ready percentage can indicate performance issues such as latency or slowdowns5.

NEW QUESTION # 53
An administrator migrates a VM onto a new Nutanix cluster- After the migration, the administrator observes the following conditions:
* Cluster memory utilization: 64%
* Cluster CPU utilization: 19%
* Cluster storage utilization. 32%
* Average VM CPU utilization: 25%
* Average VM CPU ready%: 24%
* Average VM memory utilization: 60%
Which two changes should the administrator make to improve VM performance? (Choose two.)

• A. Add more memory to the VMs.
• B. Reduce the number of VMs on the hosts.
• C. Replace high core count CPUs with high clock rate CPUs.
• D. Reduce the number of vCPUs assigned to VMs.

Answer: B,C

NEW QUESTION # 54
Which component ensures uniform distribution of data throughout the cluster to eliminate hot spots and speed up rebuilds?

• A. Cassandra
• B. High Availability
• C. Distributed Storage Fabric
• D. Acropolis App Mobility Fabric

Answer: C

Explanation:
According to the web search results, Distributed Storage Fabric (DSF) is the scale-out storage technology that makes HCI and cloud possible45. DSF pools the storage devices that are directly attached to a cluster of servers and presents them to applications across a variety of storage protocols4. DSF also manages and protects data by a fine-grained, distributed metadata system that ensures uniform distribution of data throughout the cluster to eliminate hot spots and speed up rebuilds

NEW QUESTION # 55
Which two private key types are supported by the Nutanix SSL certificate implementation? (Choose two.)

• A. ECDSA
• B. ECDH
• C. RSA
• D. ED25519

Answer: A,C

NEW QUESTION # 56
An administrator needs to bring down a host in a Nutanix Cluster for maintenance reasons. The administrator puts the host in maintenance mode.
What should the administrator do to perform an orderly shutdown of the CVM?

• A. Execute the cvm_shutdown -P now command from the host.
• B. Enter Fewer off Server-orderly Shutdown from the IPMI console.
• C. Enter Fever off Server - immediate from the IPMI console.
• D. Execute the cvm_shutdown -P new command from the CVM.

Answer: D

Explanation:
According to the How to use the cvm_shutdown script web search result3, the cvm_shutdown script signals HA when shutting down the CVM (Controller VM) to forward the storage traffic to another healthy CVM. Instead of using sudo shutdown or sudo reboot commands, this script should be used to minimize I/O hits in user VMs running on the present hypervisor host. The cvm_shutdown -P now command will initiate the shutdown process on the CVM immediately. Therefore, if the administrator needs to perform an orderly shutdown of the CVM, they should execute this command from the CVM.

NEW QUESTION # 57
An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.

Which three steps must the administrator take to increase throughput to the host? (Choose three.)

• A. Change the VLAN ID to a higher priority ID.
• B. Remove any 1Gb interfaces still connected from the default bond.
• C. Change the bond mode to balance-slb or balance-tcp.
• D. Connect the 10Gb interfaces to the physical switch.
• E. Add a new switch to the network and connect 1Gb interfaces to it.

Answer: A,C,D

NEW QUESTION # 58
An administrator notices that most of the VMs in the cluster are on one host. Users report that an application seems to respond slowly. The application server VM has significantly more memory assigned to it than other VMs.
How should the administrator fix this issue?

• A. Reduce the amount of memory assigned to the VM.
• B. Migrate the VM to a different host.
• C. Increase the memory on the CVM.
• D. Add more memory to the VM.

Answer: A

Explanation:
According to the Troubleshoot high memory issues on Azure virtual machines web search result2, one of the common factors in a low memory situation is over-provisioning memory for a VM. Over-provisioning memory can cause memory pressure, which leads to swapping and degraded performance. Therefore, to fix this issue, the administrator should reduce the amount of memory assigned to the VM, based on the average hardware requirements for that operating system and application load.

NEW QUESTION # 59
Async DR is configured between two sites. A network outage occurs at the primary site.
Which steps must the administrator perform to bring the VMs back into service at the backup site?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.

Answer:

Explanation:

NEW QUESTION # 60
An administrator has been asked to enable block awareness and increase the fault tolerance to FT2 on a Nutanix AHV cluster with the following configuration:
Four blocks
One node per block
Will the administrator be able to accomplish these tasks?

• A. No-FT2 requires a minimum of five nodes.
• B. Yes-FT2 requires a minimum of three nodes.
• C. Yes-Block awareness requires a minimum of three blocks.
• D. No-Fault tolerance changes are not supported.

Answer: A

NEW QUESTION # 61
An administrator was reviewing various AOS logs when a it was noticed that the time of the logs were off by several hours.
Which initial step was missed during the post process cluster configuration?

• A. Setting the cluster time zone via PE GUI
• B. Setting the cluster time zone via CVM ACLI
• C. Setting the cluster time zone via CVM NCLI
• D. Setting the cluster time zone via PC GUI

Answer: C

NEW QUESTION # 62
An administrator needs to ensure logs, alerts and information is consistent across clusters that are located in different countries.
Which service needs to be configured?

• A. SNMP
• B. SMTP
• C. NTP
• D. DNS

Answer: C

Explanation:
NTP service needs to be configured to ensure logs, alerts and information is consistent across clusters that are located in different countries. NTP stands for Network Time Protocol and it is used to synchronize the clocks of all the nodes in a cluster1. This helps to maintain accurate timestamps for logs, alerts and other information that are generated by Nutanix clusters1.

NEW QUESTION # 63
An administrator wants to ensure that data in a container is stored in the most space efficient manner as quickly as possible after being written, Which space efficiency too meets this requirement?

• A. Cache Deduplication
• B. Erasure Coding
• C. Thin Provisioning
• D. Inline Compression

Answer: D

Explanation:
inline compression is a technique that compresses all incoming write I/O operations over 4 KB inline in the persistent write buffer (oplog)23. This approach enables you to use oplog capacity more efficiently and helps drive sustained performance2. From AOS 5.18 onward, inline compression (compression delay=0) is enabled by default for all new containers24.
https://portal.nutanix.com/page/documents/solutions/details?targetId=TN-2032-Data-Efficiency:TN-2032-Data-Efficiency

NEW QUESTION # 64
......

The NCP-MCI-6.5 certification exam covers a wide range of topics, including Nutanix cluster installation and configuration, virtual machine management, storage management, network configuration, and cloud administration. Through NCP-MCI-6.5 exam, candidates will learn how to manage and deploy Nutanix solutions across multiple cloud environments, including private, public, and hybrid clouds. Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5 exam certification is ideal for IT professionals who want to validate their skills and knowledge in managing and deploying modern, multicloud infrastructure solutions using Nutanix technology.

The NCP-MCI-6.5 exam measures the candidate's ability to install, configure, and manage Nutanix solutions in a multi-cloud environment. It also tests their knowledge of Nutanix software and hardware components, as well as their ability to troubleshoot issues related to the Nutanix infrastructure. Professionals who pass the NCP-MCI-6.5 exam are considered Nutanix Certified Professionals (NCPs) and are recognized as experts in implementing and managing Nutanix solutions.

 

LATEST NCP-MCI-6.5 Exam Practice Material: https://torrentpdf.guidetorrent.com/NCP-MCI-6.5-dumps-questions.html