EMC DES-6332 Exam Info and Free Practice Test | GuideTorrent
Pass EMC DES-6332 Premium Files Test Engine pdf - Free Dumps Collection
NEW QUESTION 32
How are port groups for VxRail Networks configured by default?
- A. Active/Active
No load balancing - B. Active/Standby
Load balancing - C. Active/Standby
No load balancing - D. Active/Active
Load balancing
Answer: C
NEW QUESTION 33
A company has bought VxRail V Series appliances with PCle network cards. How can the PCle NIC ports be configured in VxRail for data traffic?
- A. During initial VxRail setup the NIC ports would be configured automatically to carry VM network traffic
- B. During initial VxRail setup the NIC ports would be configured automatically to carry both vMotion and VM network traffic
- C. Create new Standard or DV switch and add these NICs as uplinks to carry both vMotion and VM network traffic
- D. Create new Standard or DV switch and add these NICs as uplinks to carry VM network traffic
Answer: D
NEW QUESTION 34
Which user interface provides remote power control (power on and power off) for VxRail E Series nodes?
- A. VMware vSphere Web Client
- B. iDRAC
- C. VxRail Manager
- D. IPMI/BMC
Answer: A
NEW QUESTION 35
A VxRail administrator wants to monitor vSAN Backend IOPS, Throughput, and Latency in the vSphere Web Client What must be turned on to monitor these metrics?
- A. vSphere Distributed Resource Scheduler
- B. vSAN Disk Management
- C. vSAN Performance Service
- D. vSAN Health Service
Answer: A
NEW QUESTION 36
What is a network consideration for VxRail version 4 5.x?
- A. IPv4 Multicast is required
- B. IPv4 Multicast and IPv6 Multicast are required
- C. IPv6 Multicast is not required
- D. IPv4 Multicast is not required
Answer: A
NEW QUESTION 37
A VxRail administrator is evaluating vSAN settings in preparation for vSAN configuration.
Which configurations will result in the lowest initial usable capacity?
- A. FTT = 1 (RAID 1 - Mirroring) Deduplication and Compression Enabled
- B. FTT = 1 (RAID 5 - Erasure Coding) Deduplication and Compression Enabled
- C. FTT = 1 (RAID 1 - Mirroring) Deduplication and Compression Disabled
- D. FTT = 1 (RAID 5 - Erasure Coding) Deduplication and Compression Disabled
Answer: B
NEW QUESTION 38
Using VxRail Manager, what information can you find under the physical health view?
- A. Model, Temperature, Memory, and Health State
- B. PSNT, Operational Status, Health State, and Memory
- C. Cluster ID. Connected Health State, and Operational Status
- D. Clusfer ID, PSNT. Model and Temperature
Answer: B
NEW QUESTION 39
Which VxRail cluster can tolerate a host failure?
- A. Number of Nodes: 3 Memory Utilization: 60%
- B. Number of Nodes: 5 Memory Utilization: 82%
- C. Number of Nodes: 4 Memory Utilization: 80%
- D. Number of Nodes: 6 Memory Utilization: 85%
Answer: A
NEW QUESTION 40
VxRail 4.5.200 has been deployed with the VxRail deployed vCenter What is the name of the vCenter datacenter for the newly deployed VxRail cluster?
- A. VxRail-Virtual-SAN'
- B. Datacenter name used during deployment
- C. Marvin-Datacenter'
- D. VxRail-Datacenter'
Answer: D
NEW QUESTION 41
Which feature captures I/O traces from ESXi and generates metrics that represent the storage I/O behavior at VMDK level?
- A. vSAN iSCSI Target Service
- B. IOinsight
- C. Storage I/O Control
- D. IOmeter
Answer: B
NEW QUESTION 42
There is a request to add new disks to an existing VM residing on a VxRail vSAN that you manage. One disk is
250 GB. The VM is using the vSAN default storage policy.
How many vSAN objects will be created?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 43
What is a consideration when planning for node expansion of an existing 4-node All-Flash Dell EMC VxRail
4 5 2xx cluster?
- A. New nodes can be hybrid or All-Flash
- B. Expansion procedure is performed by Dell EMC or a Dell EMC partner
- C. vSphere Web Client is used to perform the expansion procedure
- D. New nodes must be identical to the existing nodes
Answer: B
NEW QUESTION 44
A VxRail administrator is adding a new node to an existing VxRail Cluster. The node has been racked, cabled, and powered on. However, the node is not discovered in the vSphere Client. Which log file should be analyzed to diagnose the issue?
- A. lcm.log
- B. loudmouth.log
- C. marvin.log
- D. mystic.log
Answer: B
NEW QUESTION 45
You are a VxRail system administrator and have received an email alert that a power failure on the VxRail has occurred. You contact Dell EMC Support and they ask you to run VxRail system diagnostics and send them a log.
Under which tab in VxRail Manager can you find the appropriate Diagnostics button?
- A. System Diagnostic
- B. System Health
- C. Config Health
- D. Config General
Answer: D
NEW QUESTION 46
What is the minimum number of nodes required to build a VxRail 4 5 cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 47
A VxRail administrator using the vSphere Client wants to manage the iDRAC configuration of a node.
Which path should be followed?
- A. Cluster > Configure > VxRail
- B. Host > Configure > VxRail
- C. Host > Monitor > VxRail
- D. Cluster > Monitor > VxRail
Answer: A
NEW QUESTION 48
A VxRail administrator has been asked to configure fault domains for an All-Flash VxRail cluster The application VMs must be able to tolerate two failures and use capacity as efficiently as possible.
What is the minimum number of fault domains that must be configured?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 49
When using a vSAN storage policy with FTT = 1 and FTM = Mirroring, how many witness components exist for a VMDK?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 50
......
Updated Official licence for DES-6332 Certified by DES-6332 Dumps PDF: https://torrentpdf.guidetorrent.com/DES-6332-dumps-questions.html