CheckPoint Exam 2023 156-585 Dumps Updated Questions UPDATED Sep-2023
Get The Most Updated 156-585 Dumps To CCTE Certification
NEW QUESTION # 15
The customer is using Check Point appliances that were configured long ago by third-party administrators. Current policy includes different enabled IPS protections and Bypass Under Load function. Bypass Under Load is configured to disable IPS inspections of CPU and Memory usage is higher than 80%. The Customer reports that IPS protections are not working at all regardless of CPU and Memory usage.
What is the possible reason of such behavior?
- A. The kernel parameter ids_tolerance_stress is set to 10
- B. The kernel parameter ids_assume_stress is set to 1
- C. The kernel parameter ids_tolerance_no_stress is set to 10
- D. The kernel parameter ids_assume_stress is set to 0
Answer: A
NEW QUESTION # 16
How can you start debug of the Unified Policy with all possible flags turned on?
- A. fw ctl debug -m UP *
- B. fw ctl debug -m UnifiedPolicy all
- C. fw ctl debug -m UP all
- D. fw ctl debug -m fw + UP
Answer: A
NEW QUESTION # 17
When a User process or program suddenly crashes, a core dump is often used to examine the problem. Which command is used to enable the core-dumping via GAIA dish?
- A. set user-dump enable
- B. set core-dump enable
- C. set core-dump total
- D. set core-dump per_process
Answer: C
NEW QUESTION # 18
You need to run a kernel debug over a longer period of time as the problem occurs only once or twice a week. Therefore, you need to add a timestamp to the kernel debug and write the output to a file but you can't afford to fill up all the remaining disk space and you only have 10 GB free for saving the debugs. What is the correct syntax for this?
- A. fw ctl kdebug -T -f -m 10 -s 1000000 > debugfilename
- B. fw ctl kdebug -T -f -m 10 -s 1000000 -o debugfilename
- C. fw ctl debug -T -f -m 10 -s 1000000 -o debugfilename
- D. fw ctl kdebug -T -m 10 -s 1000000 -o debugfilename
Answer: C
NEW QUESTION # 19
What are the maximum kernel debug buffer sizes, depending on the version
- A. 4MB or 8MB
- B. 8MB or 32MB
- C. 32MB or 64MB
- D. 8GB or 64GB
Answer: B
NEW QUESTION # 20
When a User Mode process suddenly crashes it may create a core dump file. Which of the following information is available in the core dump and may be used to identify the root cause of the crash?
i Program Counter
ii Stack Pointer
ii. Memory management information
iv Other Processor and OS flags / information
- A. iii and iv only
- B. i, ii, lii and iv
- C. i and n only
- D. D Only iii
Answer: A
NEW QUESTION # 21
Which of the following is NOT a vpn debug command used for troubleshooting?
- A. pclient getdata sslvpn
- B. vpn debug trunc
- C. fw ctl debug -m fw + conn drop vm crypt
- D. vpn debug on TDERROR_ALL_ALL=5
Answer: A
NEW QUESTION # 22
Jenna has to create a VPN tunnel to a CISCO ASA but has to set special property to renegotiate the Phase 2 tunnel after 10 MB of transferee1 data.This can not be configured in the smartconsole, so how can she modify this property?
- A. this cant be done anymore as GUIDBEDIT is not supported in R80 anymore
- B. using GUIDBEDIT located in same directoryas Smartconsole on the Windows client
- C. she need to install GUIDBEDIT which can be downloaded from the Usercenter
- D. she need to run GUIDBEDIT from CLISH which opens a graphical window on the smartcenter
Answer: D
NEW QUESTION # 23
You need to runa kernel debug over a longer period of time as the problem occurs only once or twice a week.
Therefore you need to add a timestamp to the kernel debug and write the output to a file What is the correct syntax for this?
- A. fw ctl kdebug -T -f -o filename debug
- B. fw ctl kdebug -T > filename debug
- C. fw ctl kdebug -T -f > filename debug
- D. fw ctl debug -T -f > filename debug
Answer: D
NEW QUESTION # 24
Rules within the Threat Prevention policy use the Malware database and network objects. Which directory is used for the Malware database?
- A. $FWDlR/conf/install_firewall_imp/ANTIMALWARE/conf/
- B. $FWDIR/conf/install_manager_tmp/ANTIMALWARE/conf/
- C. $FWDlR/log/install_manager_tmp/ANTIMALWARBlog?
- D. $CPDIR/conf/install_manager_lmp/ANTIMALWARE/conf/
Answer: B
NEW QUESTION # 25
What is the correct syntax to set all debug flags for Unified Policy related issues?
- A. fw ctl debug -m fw all
- B. fw ctl kdebug -m UP all
- C. fw ctl debug -m UP all
- D. fw ctl debug -m up all
Answer: C
NEW QUESTION # 26
What acceleration mode utlizes multi-core processing to assist with traffic processing?
- A. Traffic Warping
- B. CoreXL
- C. SecureXL
- D. HyperThreading
Answer: D
NEW QUESTION # 27
How many tiers of pattern matching can a packet pass through during IPS inspection?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 28
Some users from your organization have been reported some connection problems with CIFS since this morning. You suspect an IPS Issue after an automatic IPS update last night. So you want to perform a packet capture on uppercase I only directly after the IPS module (position 4 in the chain) to check if the packets pass the IPS. What command do you need to run?
- A. fw monitor -pi 5 -e <filterexpression>
- B. fw monitor -ml -pl 5 -e <filterexpression>
- C. tcpdump -eni any <filterexpression>
- D. fw monitor -pl asm <filterexpression>
Answer: B
NEW QUESTION # 29
Check Point Access Control Daemons contains several daemons for Software Blades and features. Which Daemon is used for Application & Control Filtering?
- A. pdpd
- B. pepd
- C. cprad
- D. rad
Answer: D
NEW QUESTION # 30
......
CheckPoint Certified 156-585 Dumps Questions Valid 156-585 Materials: https://torrentpdf.guidetorrent.com/156-585-dumps-questions.html